Solid fossil fuels such as coal formed from decomposing vegetation over many millions of years. Coal has been used for centuries by mankind for energy provision.
It is part of our everyday lives and with a little bit of thought, can be made to perform better. Some simple steps can help improve fuel burning efficiency and help you get more from your fuel, cut your fuel bills and also cut down on gas emissions that cause global warning.
It is important to increase our awareness of energy efficiency not only because of increasing costs but to realise that all fossil fuels (oil, gas and solid fuel) release greenhouse gases into the atmosphere that contribute to global warming.
Appliances are manufactured to perform best with certain types of fuel so always use the type of fuel that has been recommended for use with your appliance. Don’t worry if you are not sure what that is, as our easy website will help you find the right fuel for your appliance.
Every product on the CoalHut.com website comes with a brief description and some information on its main characteristics. All products sourced and sold by the CoalHut.com have been chosen for you as they offer the highest quality and best value for money. Our premium products tend to have higher heat output and lower ash content.
Ash and clinker – Never allow ash to build up in the ash pan as in addition to being a potential carbon monoxide hazard, it could damage your firebars. Clear excess ash and clinker regularly from your grate to allow air to circulate in your fire and your appliance to function to capacity. Why not check out our guide to creating the perfect fire.
Get your chimney swept regularly (at least once a year and twice if burning wood or house coal).
Follow the manufacturer’s instructions on maintenance. On closed appliances clean the throat plate and check all door seals to ensure that they are airtight. Any boiler surfaces should be scraped clean every heating season. Although some appliances can be used with the door open, they will be more efficient with the door closed and you reduce the risk of sparks escaping.
Don’t leave appliances on standby unnecessarily.
Use low energy light bulbs and switch off if a room is not in use.
Draw curtains at night to save loss of energy through windows.
Don’t put hot or warm food in the fridge.
Use a lower temperature (eg. 30˚C) in your washing machine to save up to 40% electricity.
Use just enough water to cover vegetables when cooking and keep the lid on.
www.EnergySavingTrust.org.uk or by telephone at 0300 123 1234
Loft insulation should be at least 270mm thick
Insulate cavity walls. If you do not have cavity walls there are methods of internal and external cladding.
Insulate the hot water cylinder and larger circulation pipes
Fit double glazing. However please note that if you have a solid fuel appliance you need to have sufficient ventilation. Ventilation requirements can be obtained from Building Control.
Central Heating systems will work more efficiently if you:
Fit a high efficiency solid fuel or multi-fuel appliance.
Fit thermostats to automatically control the operation of the system and so reduce fuel consumption. (If you have thermostats fitted you should check to see if they are working properly)
Fit a “link-up system” to combine your solid fuel heating with another energy supply such as gas to give you more options and reduce dependency on more expensive fuels.
Fit an adjustable throat restrictor to reduce draughts.
Fit glass fire doors to save fuel, especially with large fires.
Fit a fire front to convert to a closed appliance and so improve efficiency.
Always remember to remove ash from the fire bed as this will allow more air to circulate and improve burning.
Remember that your fire burns best when there is a good flow of air. You should make sure the draught is controlled in open fires by using the air vents in the grate and by opening or closing the damper if fitted. Ashes should be riddled and a poker used to make it possible for air to be allowed into the combustion area.